Australia's construction sector cannot find enough quantity surveyors. Major infrastructure programmes, a sustained housing shortage and a wave of commercial development across Sydney, Melbourne, Brisbane and Perth have pushed quantity surveying onto the country's Medium and Long-term Strategic Skills List, opening a genuine pathway to permanent residence for suitably qualified applicants.
For UK-trained QSs, the appeal is obvious: stronger salaries once converted, a well-established quantity surveying profession with its own chartered body, and a construction industry that runs on the same measurement principles, standard forms of contract heritage and cost-management logic taught on UK degree courses. The transition is not automatic, though - it runs through a formal skills assessment, a choice of visa pathway, and a decision about how (or whether) to carry RICS chartered status across.
This guide walks through the full process a UK quantity surveyor needs to plan for: how the Australian Institute of Quantity Surveyors (AIQS) assesses UK qualifications and experience, how mutual recognition between AIQS and RICS actually works, which skilled migration visas apply to quantity surveyors, what salaries and living costs look like once you arrive, and how to find work once your visa is in hand.
One point applies throughout: Australian immigration policy, occupation lists and points requirements change frequently, sometimes with little notice. Nothing here should be treated as immigration advice - always confirm current requirements directly with the Australian Department of Home Affairs, AIQS and a registered migration agent before making decisions or spending money on an application.
UK quantity surveyors can work in Australia by first obtaining a positive skills assessment from the Australian Institute of Quantity Surveyors (AIQS), the sole designated assessing authority for the occupation. Quantity Surveyor (ANZSCO code 233213) sits on Australia's Medium and Long-term Strategic Skills List, making it eligible for the Skilled Independent visa (subclass 189), Skilled Nominated visa (subclass 190) and Skilled Work Regional visa (subclass 491), as well as employer-sponsored routes. AIQS has mutual recognition arrangements with RICS, which can smooth membership transfer once you arrive, though it does not replace the separate migration skills assessment. Typical Australian QS salaries run higher than UK equivalents in nominal terms, though cost of living - particularly housing in Sydney and Melbourne - narrows the real-terms gap. Because visa rules change often, always verify current requirements with the Department of Home Affairs before committing to a move.
Why Australia Needs Quantity Surveyors Right Now
Australia's construction industry has spent several years running hotter than its domestic workforce can supply. State governments are mid-way through record infrastructure pipelines - metro rail extensions in Sydney and Melbourne, hospital rebuilds, renewable energy grid connections - while a chronic housing shortfall keeps residential and build-to-rent development at pace in every major city. Quantity surveyors sit at the centre of all of it: cost planning, tendering, contract administration and final accounts are needed on every one of these projects, and there simply aren't enough locally trained QSs to go around.

That shortage is precisely why quantity surveying (ANZSCO 233213) has held a place on the Medium and Long-term Strategic Skills List (MLTSSL) for years running. Recruiters report job boards regularly carrying well over a thousand live QS vacancies nationally, with particular demand in Sydney, Melbourne, Brisbane, and increasingly Perth on the back of mining and energy-related construction work.
- Major state infrastructure programmes (rail, roads, hospitals, schools) running concurrently across multiple cities
- A sustained national housing undersupply driving apartment and build-to-rent construction
- An ageing local QS workforce with fewer graduates entering the profession than demand requires
- Government energy transition projects (solar, wind, grid upgrades) adding a new category of cost management work
For UK QSs, this demand translates into genuine leverage - both for skilled migration visa prospects and for negotiating salary and relocation packages with Australian employers and recruiters.
This isn't a short-term spike either. Industry bodies and recruiters have been flagging a structural quantity surveying shortage in Australia for several years, driven as much by a wave of retirements among experienced local QSs as by the sheer volume of new work. That combination - long-term demand plus a thinning domestic pipeline of graduates - is why the occupation keeps its place on the strategic skills list year after year, rather than appearing only during a temporary construction upswing.
The AIQS Skills Assessment: Your First Step
Why the assessment matters
Before you can lodge an Expression of Interest for most skilled migration visas, quantity surveyors need a positive skills assessment from the Australian Institute of Quantity Surveyors (AIQS). AIQS is the government-designated assessing authority for the quantity surveying occupation, meaning no other body's approval will satisfy the Department of Home Affairs for this pathway - RICS chartered status alone does not substitute for it.
What AIQS checks
The assessment reviews your qualification (usually a RICS-accredited quantity surveying degree), your work history, and whether your day-to-day duties match the ANZSCO 233213 occupation description. AIQS typically expects a relevant bachelor's degree and a minimum period of post-qualification experience - most guidance points to around two to three years, though exact thresholds and evidentiary requirements are set by AIQS and can be revised, so check the current published criteria before applying.
- Certified copies of your degree certificate and full academic transcript
- Detailed employment references describing your duties, not just your job title
- Payslips, contracts and tax records evidencing the employment history you're claiming
- A statement or CV mapping your experience against the ANZSCO 233213 task list
Applicants consistently describe the paperwork as the hardest part - references need to be specific about tasks performed (cost planning, measurement, valuations, final accounts) rather than generic job descriptions, and gaps in evidence are a common cause of delay or a negative outcome. Build your evidence file early, ideally before you resign from your current UK role.
It's also worth budgeting for the assessment financially as well as administratively - AIQS charges an application fee, and you may need to pay for certified translations, transcript requests from your UK university, or a qualifications comparison if your degree isn't on AIQS's automatically recognised list. None of this is prohibitively expensive on its own, but it adds up alongside visa application charges, English test fees and migration agent costs, so it's worth mapping the full cost of the process before you start rather than discovering extra fees partway through.
RICS and AIQS: How Your UK Qualifications Transfer
UK quantity surveyors emigrating to Australia are usually already RICS members - either MRICS chartered or working towards it. The good news is that AIQS and RICS have long-standing links, including mutual recognition arrangements that make it easier to hold membership of both bodies once you're established in Australia.

In practice, AIQS Affiliate or Associate members who qualified in Australia are approved for direct entry to AssocRICS, and AIQS members holding Certified or Chartered Quantity Surveyor status with several years of post-membership experience can qualify for direct entry to MRICS. The reverse direction - RICS members seeking AIQS membership - is generally handled through AIQS's own mutual recognition and membership assessment routes rather than an automatic swap, so UK QSs should apply to AIQS membership separately from (and in addition to) the migration skills assessment.
Two separate processes, not one
It's worth being clear-eyed about this: the AIQS migration skills assessment (required for your visa) and AIQS professional membership (required to use post-nominals and practise under Australian professional standards) are administered as distinct processes with their own forms, fees and evidence requirements. Many UK QSs complete the migration assessment first to secure their visa, then pursue full AIQS membership once settled and working in Australia. Retaining your RICS membership alongside AIQS membership is common and often encouraged, since it keeps your UK-recognised chartered status live if you ever return.
Skilled Migration Visa Routes for Quantity Surveyors
Quantity Surveyor sits on Australia's Medium and Long-term Strategic Skills List (MLTSSL) under ANZSCO code 233213, which opens several visa pathways. The right one depends on whether you already have a job offer, which state you want to live in, and how many points you can score.
- Skilled Independent visa (subclass 189) - permanent residence with no state nomination or employer sponsorship required; you lodge an Expression of Interest through SkillSelect and wait for an invitation based on your points score
- Skilled Nominated visa (subclass 190) - permanent residence with state or territory nomination, which adds points to your score but usually commits you to living in that state for a period
- Skilled Work Regional visa (subclass 491) - a provisional visa for regional areas, offering a pathway to permanent residence after a qualifying period
- Employer Nomination Scheme (subclass 186) and other employer-sponsored routes - available where an Australian construction firm is willing to sponsor you directly
All of these routes require a positive AIQS skills assessment and typically a minimum points score (historically 65 points, though the pass mark for invitations in practice is often higher) built from age, English language ability, skilled work experience, and qualifications. Points-tested visas are competitive - invitation rounds depend on occupation ceilings and the pool of applicants competing in any given period, both of which change.
State nomination through the subclass 190 or regional routes can be worth pursuing even if you'd qualify for the independent subclass 189, since individual states periodically run targeted invitation rounds for construction occupations when local shortages are especially acute. New South Wales, Victoria and Queensland have all, at various points, prioritised quantity surveyors within their nomination programmes - so it's worth checking each state's current occupation priority list alongside the national one rather than assuming subclass 189 is automatically the fastest route.
Because subclass numbers, points requirements, occupation list inclusion and processing priorities are revised regularly by the Australian government, treat any figures here as a starting point for research rather than a fixed rulebook. Confirm current settings on the Department of Home Affairs website or with a registered migration agent (MARN-registered) before lodging anything.
Salary and Cost of Living: UK vs Australia
Headline Australian QS salaries look strong against UK figures once converted, though the comparison needs a cost-of-living lens - particularly for housing in Sydney and Melbourne, which run well above most UK regional markets and are closer to, or above, London.
Table 01 / UK vs Australia comparison
How UK and Australian quantity surveying compare on qualifications, pay and cost of living
| Feature | United Kingdom | Australia |
|---|---|---|
| Chartered body | RICS (MRICS / FRICS) | AIQS (AAIQS / FAIQS) |
| Typical mid-career salary | Approx £45,000-£60,000 | Approx AU$105,000-AU$125,000 |
| Entry-level salary (1-3 yrs) | Approx £28,000-£35,000 | Approx AU$93,000-AU$100,000 |
| Senior / 8+ years | Approx £65,000-£85,000+ | Approx AU$140,000-AU$145,000+ |
| City housing cost pressure | Highest in London / South East | Highest in Sydney, close behind in Melbourne |
| Standard forms of contract | JCT, NEC4 | AS 4000, AS 4902, AS 2124 |
Source: SEEK Career Advice, Indeed Australia, RICS, AIQS - figures are indicative averages and vary by region, sector and employer; verify current data before negotiating an offer.
The salary uplift is real, but Australian employers usually also factor in superannuation (currently a mandatory employer contribution on top of base salary), and many roles - particularly on major infrastructure and residential schemes - offer relocation assistance or a sign-on package for overseas hires with a positive skills assessment already in hand. Weigh any offer against rent in your target city: a one-bedroom apartment in central Sydney or Melbourne can absorb a significant share of net income, whereas Brisbane, Adelaide and Perth generally offer a softer cost-of-living trade-off for a comparable QS salary.
Finding Work as a UK-Qualified QS in Australia
Once your skills assessment is in hand and your visa pathway is clear, the job search itself runs on familiar lines. Australia's major contractors and consultancies actively recruit overseas QS talent, and several recruitment agencies specialise specifically in bringing UK and Irish quantity surveyors into the Australian market.

- Specialist construction recruiters with UK-to-Australia desks (search LinkedIn and recruiter sites for 'quantity surveyor Australia relocation')
- Tier 1 contractors (Multiplex, Lendlease, Mirvac, John Holland, CPB Contractors) with active graduate and lateral-hire QS pipelines
- Major QS and cost consultancies with Australian offices (Rider Levett Bucknall, Turner & Townsend, Currie & Brown, Arcadis) - useful if you want to transfer internally rather than apply cold
- SEEK and Indeed Australia, the two dominant local job boards for construction roles
- AIQS's own member networking events and state chapter meetups, useful once you're assessed and have arrived
Many candidates find it easier to secure interviews - and sometimes sponsorship - once they can show a positive AIQS skills assessment or an active visa application in progress, since it signals to employers that you're a serious, near-term hire rather than a speculative enquiry. Some UK QSs also use a large international consultancy with both UK and Australian offices as a stepping stone, transferring internally once a suitable Australian vacancy opens up.
Tailor your CV before you apply rather than sending your UK version as-is. Australian employers expect to see AS 4000-style contract experience framed clearly, superannuation and salary packaging terms understood, and - if you have it - any exposure to Australian project types such as build-to-rent or renewable energy infrastructure highlighted prominently, even if the underlying skill is the same cost planning or measurement work you did in the UK.
Practical Tips for the Move
Start the AIQS skills assessment well before you plan to move - processing takes time, and a negative outcome due to thin evidence can set your timeline back by months. Build your reference and payslip file over several weeks rather than scrambling at the last minute.

- Get quotes for international removals or shipping early - container slots and pricing move seasonally
- Check whether your qualification and experience level clear the current points threshold before paying assessment fees
- Budget for setup costs: bond (often 4-6 weeks' rent), utility connection fees, and a gap before your first Australian payslip
- Look into UK-Australia tax treaty implications and seek advice on National Insurance and pension continuity before you leave
- Join AIQS and, if relevant, keep RICS membership active - both look good on a CV and keep two professional networks open
- If moving with family, research school terms (the Australian school year runs roughly late January to December) well ahead of the move
Finally, treat the first few months as an adjustment period even for an experienced QS - measurement conventions, standard forms of contract (AS 4000 and AS 4902 rather than JCT and NEC4), and procurement norms differ enough from the UK that it's worth reading up before your first day, even if the underlying discipline is the same.
Frequently Asked Questions
Do I need RICS membership to work as a quantity surveyor in Australia?
No. RICS membership is not a legal requirement to work in Australia, but most UK-trained QSs hold it, and it strengthens both your AIQS skills assessment evidence and your professional credibility with Australian employers. AIQS membership is the more directly relevant credential once you're working locally.
How long does the AIQS skills assessment take?
Processing times vary and are published by AIQS directly, but applicants should budget for a process that can run into several months once documentation, references and any follow-up requests are accounted for. Start early and don't assume a fast turnaround.
Can I migrate to Australia as a quantity surveyor without a job offer?
Yes, in principle - the Skilled Independent visa (subclass 189) does not require a job offer or employer sponsorship, provided you have a positive AIQS skills assessment and score enough points on the General Skilled Migration points test. Competition for invitations means a job offer or state nomination can still improve your prospects.
What is ANZSCO 233213?
ANZSCO 233213 is the official Australian occupation code for Quantity Surveyor, used by the Department of Home Affairs and AIQS to define the skills, tasks and qualifications assessed for migration purposes.
Is quantity surveying in demand across all of Australia, or just certain cities?
Demand is strongest in Sydney, Melbourne and Brisbane due to infrastructure and housing pipelines, but Perth and regional areas are also active, particularly around mining, energy and regional housing projects - some of which may qualify for regional visa pathways.
How much do quantity surveyors earn in Australia compared to the UK?
Nominal Australian salaries are generally higher than UK equivalents at every career stage, though higher living costs in Sydney and Melbourne narrow the real-terms advantage. Brisbane, Adelaide and Perth often provide a stronger cost-of-living balance for a comparable salary.
Do visa rules for quantity surveyors change often?
Yes. Occupation lists, points requirements and visa subclass settings are reviewed periodically by the Australian government and can change with limited notice. Always check the Department of Home Affairs website and AIQS directly for current requirements before applying, and consider using a registered migration agent.
Final Thoughts
The fundamentals that make a good UK quantity surveyor - measurement discipline, contract knowledge, and clear cost reporting - transfer directly to the Australian market, which is exactly why demand for overseas QSs remains strong. The administrative path is more involved than simply applying for a job, though: a positive AIQS skills assessment comes first, your visa pathway needs to be chosen deliberately, and your RICS background should be treated as a foundation to build on rather than a credential that automatically carries across.
Given how often occupation lists and points requirements shift, the most useful thing you can do early is start a direct conversation with AIQS about your specific qualification and experience, and, if the move feels serious, engage a registered migration agent who works with construction occupations specifically. Everything else - job search, salary negotiation, settling in - gets considerably easier once that foundation is in place.
None of this needs to happen overnight. Many UK QSs spend six to twelve months preparing - assessment, savings, research, and sometimes a scouting trip - before committing to the move, and that preparation time is rarely wasted given how much the process depends on paperwork being right the first time.
Want the full picture? Planning an international move as a QS?
Read our guides on RICS APC and Assessment of Professional Competence, Chartered vs Non-Chartered QS status, and Freelance vs Permanent QS work for more on building a career that travels well, whichever country you end up in.
Sources / Further reading
Official guidance and contractor resources
| 01 | AIQS Migration Skills Assessments |
| 02 | AIQS Mutual Recognition |
| 03 | AIQS Entry via Mutual Recognition |
| 04 | RICS What is it like to work in Australia? |
| 05 | RICS Approved Qualifications for Direct Entry to MRICS |
| 06 | SEEK Career Advice Quantity Surveyor Salary in Australia |
| 07 | Indeed Quantity Surveyor Salary in Australia |
| 08 | Migration Republic Quantity Surveyor Skills Assessment ANZSCO 233213 |
| 09 | The Migration How Do I Migrate to Australia as a Quantity Surveyor? |
| 10 | Sterling Migration The Quantity Surveyor's Guide for Emigrating to Australia |
| 11 | Maxim Recruitment Australia Is Crying Out for Quantity Surveyors |




